Regulator for Nitrogen - M10 Thread (nitrogen, argon, co2)

This regulator is designed to suit our disposable - 2.2L Nitrogen (N2) Cylinder

We cannot guarantee them working with other disposable N2 cylinders on the market

This regulator can be adjusted from 0 - 50psi (3.4bar/344kPa)

Duotight Fitting compatible
To use a push in fitting on this regulator you will need to order 1 x DM Push In Fitting - FEMALE ADAPTOR MFL Thread to 8mm OD

Nitrogen (N2) Compatible
Nitrogen doesn't dissolve as easily into liquid like Carbon Dioxide (CO2). The nitrogen produces tiny bubbles that feel smooth on the tongue, exscenuating a creamy effect in beer/coffee.
Another common taste factor noticed by beer brewers is that it can quell bitterness. 
Nitro also accenuates the malt flavours compared to CO2. Other taste factors commonly associated with using nitrogen is a rich mouthfeel sensation. These beers/coffees when poured will have a cascading effect in the glass. The nitrogen bubbles appear to be falling to the bottom, while the bubbles in the middle of the glass circle upwards. These systems are extremely popular in new-age coffee shops, as the nitro provides a creamy effect without the need of adding milk!
Argon (Ar) Compatible
Carbon Dioxide (CO2) Compatible

Instructions
Attach the regulator to to the top of your disposable cylinder.  Turn pressure up to desired level. 
To avoid the chance of leaks and returning to an empty bottle, please triple check every connection point on your system or disconnect your gas cylinder between uses.

PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detaches from the fitting.